AUTHNETOS

Your business network. Ready from first boot.

AuthNet networking, captive portal, access-point management and power-system tools in one image. Start with NanoPi R3S and provision it directly from your dashboard.

Generate a provision string Browse downloads

FIRMWARE

Available images

Only published releases appear here. Match the device model and verify the SHA-256 checksum before flashing.

Loading published images…

GET STARTED

From image to business network

Download the NanoPi R3S image and write it to a microSD card with an image writer that supports .img.gz files.
Boot the NanoPi. Connect WAN to your internet connection and your computer to LAN.
In the dashboard, open NAS → Onboard and select your business, realm and WiFi SSID.
Open http://172.31.0.1 on the LAN and enter the provision string. The device registers directly with AuthNet and restarts with your settings.

NanoPi R3S has no built-in WiFi. Your selected SSID is used by connected AuthNet access points. The image includes USB serial drivers, the power-system bridge and ESP32 flashing tools.

Flashing replaces the contents of the selected storage device. Back up existing data and check the selected drive before writing.